As with the PMTHDA this tracker is designed to suit a 50mmx50mm pole. Pole is NOT included.
You can easily alter the PMTX to suit a 75mmx 75mm or even a 100mmx100mm pole. You simply use longer bolts on the spine to side-plates and space the side-plates out to suit.
NOTE; Due to the cost involved, I will only have one of these on hand, if possible, at any time, and will in most cases involve a turnaround time of 3 to 5 days befor shipping, after my recieving cleared payments. So book ahead people.
If my health is not tops at time of ordering you will be advised of any delays, and if unable to complete a unit in a reasonable time a full refund will be given until my health recovers.
I always have my health condition and delay times in the box on the home page. Just look for Dave's Healthometer. haha. new word there..!
And remember,,,,,, Smile Damn it.....! Life ain't so bad.
Assemling your PMTX tracker
home Page
Click here to order your PMTX tracker
Or go here to order Solar Sensors.
Or ask Dave a Question dave@campatracka.com

I was asked to design a tracker to carry two x 175w panels, so here is the result.
The PMTX series dual Axis Solar Tracker.
As seen on the photos these are using 36v rated linier Actuators, so I recommend you stay with 24volt operating system on these.
They will run on 12volts but very slowly, and my main concern would be lack of grunt on 12volts to move the North/South Actuator when loaded with panels.
People, please read my Terms & Conditions of sale. Due to the fact I build these strictly as a hobby, and the huge costs involved, I have NOT had any of my trackers wind & stress tested, and are primerily designed as a starter kit for the DIY guys to build upon, we campatracka.com take no responcibility for any damages or injuries caused by wind or any means what so ever. They are built in-house and are supplied with workmanship and component warranties only on a repair or replacement at my descretion only. So you could say they are sold on a "buyer be ware" bassis.
I have to date never had a claim on a tracker assembly, and only 5 claims on faulty sensors. Which is a pretty damned good record in my opinion. So should anything fail within the warrenty period you will be looked after so far as back up repair or replacement. But that is the limmit to any warrenties implied or otherwise.
On left, the PMTX as a budget buy for international buyers who can find their own actuators and make their own pivots.
Also for domestic buyers who have a hip-pocket-problem like me.
If you scout around you can find cheep 2nd hand satalite dish actuators, or get creative in the shed and make your own driving device.

Contact dave@campatracka.com for any other info required.
Phone Dave 02 63424309


On Left; the PMTX head assembly starter kit.
Starter Kit Includes the head assembly as shown and the SDA dual axis Solar sensors only
It does NOT include the actuators or pivot panel mounts or Pole grips.
Head assembly & sda Sensors Price see the Tracker Store.

 International buyers please ask for a shipping price to your country. dave@campatracka.com
Weight of head assembly when packed is 8kg
With Sensors weght is 10.2kg

To order your PMTX dual axis Tracker simply email dave@campatracka.com for total price.
Payment can be sent via Paypal or Bank deposit. International buyers can only pay via Paypal
Or place an order right now in tracker Store.
A guid to International shipping cost.
To send the full assembly overseas, I can not include pivots, or panel mounts exceeding 1mtr long.
To ship the full assemly with one mtr long pivots, including both actuators & sensors total weight =19kg, 20kg when packed.
Airmail to the usa for a 20kg item is $323.00AUD
To ship the head & sensors to USA is $187.00AUD
As giving warrenty on an overseas item of this size is next to impossible, I can give a discount on the tracker to international buyers in waver of the trackers usual warrenties. Contact Dave for details.
Warrenty on the pmtx within Australia is 12months on the tracker assembly and sensors, the actuator manufacturers only give me 3months, so I can only give you 3months warranty of the actuators within Australia.
International warranty will apply to sensors only, at a discounted rate on the assembly as compensation. International buyers please contact me with your location and the no warranty price and shipping to your location.
Assemling your PMTX tracker
home Page